PRODUCT
Home > PRODUCT > AMPHI-NEON STRIP
AMPHI-NEON STRIP
| Absolute Maximum Rating at 25℃ | |
| Parameters | Absolute Maximum Rating |
| Working Voltage | 24VDC |
| Rated power per meter | 15W /meter |
| LEDs per meter | 168 LEDs /meter |
| Lumen per meter | 36 LM (4000K) /meter |
| Standard Continuous Length | 10 meters |
| Waterproof Rating | IP 68 |
| Storage Temperature | -40 ~ +65 ℃ |
| Operating Temperature | -40 ~ +45 ℃ |
| Min. Cutting Unit and Length | 1 LED, 6 mm |
| Weight | 265.2g /meter |
| Item No. | Color | Rated Power |
| TLDNS1616HPPW2-24 | WARM WHITE 3000K | 15W |
| TLDNS1616HPPW4-24 | NATURAL WHITE 4000K | 15W |
| TLDNS1616HPPW5-24 | NATURAL WHITE 5000K | 15W |
Package Dimensions (unit: mm)
Spectrum Chart
Installation Steps
|
Step 1: Insert the two pins of power cable into the strip 
|
Step 2: Connection pins  |
|
Step 3: 3: fix in the connector 
|
Step 4: Make sure connector cover locked tightly 
|
|
Step 5: Finish 
|
Step 6: block hold with glue 
|
|
Step 5: Fix the accessory
|
Step 6: put strip into profile
|
|
Step 7: Put the strip into the weldless middle connector 
|
Step 8: Finished product 
|
|
Step 9: Fix the metal connection pins 
|
Step 10: Put the strip in the connector 
|
|
Step 11: Fix the strip with middle connector 
|
Step 12: Lock the middle connector 
|
|
Step 13: make sure connector cover locked tightly 
|
Step 14: block hold with glue again 
|
|
Step 15: Screw the clips   
|
Step 16: Fix the strip with clips 
|
|
Step 17: Final installation 
|
Note: 1.The positive and negative marked on FPCB. |
